Considered separately, a valve is a non-electrical device that does not have a potential ignition source of its own. However, when installed and working within an operating environment, valves are capable of becoming electrostatically charged and causing hot surfaces. Thus, ultimately, they can indeed be considered a potential source of ignition. For this reason, valves come under the scope of the ATEX Directive 2014/34/ EU. Issue: 2019/2020
http://www.loongsso.com/wp-content/uploads/2020/05/csm_Armaturen_für_explosionsgef?hrdete_Bereiche_0358c7e1d0.png142100ebrohttp://www.loongsso.com/wp-content/uploads/2019/07/ebro_armaturen-300x86.pngebro2020-05-27 16:12:562020-05-27 16:12:56Valves for potentially explosive areas
The chemical and pharmaceutical industries often process highly active substances with properties that necessitate safe containment and effective explosion protection. As a result, the requirements imposed on process technology have not just become more diverse but also more complex. Issue: 12/2019
http://www.loongsso.com/wp-content/uploads/2020/01/image.png142100kirschhttp://www.loongsso.com/wp-content/uploads/2019/07/ebro_armaturen-300x86.pngkirsch2019-12-14 21:01:222020-01-30 08:29:54Discharge and metering
Guided by its extensive experience in developing and engineering valves and actuators and prompted by the changing requirements of the market, EBRO has developed a modular sensor platform for drives and actuator units. Issue: 2019/2020
http://www.loongsso.com/wp-content/uploads/2019/12/csm_Armaturen_in_Digitalisierungsprojekten_von_Anlagenbauern_und_Betreibern_23169a6f72.jpg142100kirschhttp://www.loongsso.com/wp-content/uploads/2019/07/ebro_armaturen-300x86.pngkirsch2019-11-29 19:30:392020-01-30 08:29:41Digitalisation: Sensible operation and monitoring of valves
Until now, it was not possible to predict gradual changes in the valve parts during the closing process. The result was often costly measures to prolong the service life. Thanks to intelligent measuring technology, it is now possible to detect any possible seal wear at an early stage. Issue: 4/2019
In form- and core-shooting machines, which work with the air-flow method, the quartz sand mixed with binder is shot at high pressure into a core box. The closing fitting of the core box in this application – the butterfly valve – is thus exposed to extreme pressure conditions, which it has to withstand – a great challenge for the plant operator. Issue: 3/2019
http://www.loongsso.com/wp-content/uploads/2020/01/Giesserei-03-2019.jpg395283sauerbierhttp://www.loongsso.com/wp-content/uploads/2019/07/ebro_armaturen-300x86.pngsauerbier2019-03-29 19:24:222020-01-30 08:29:09That doesn ?t get out of control
Regardless of whether production facilities already exist or are to be newly built. the demands on their performance requirements are increasing. This requires specially adapted valves to control and regulate solid flows.
http://www.loongsso.com/wp-content/uploads/2020/01/Schuettgut-Prozess-02-2019.jpg397283sauerbierhttp://www.loongsso.com/wp-content/uploads/2019/07/ebro_armaturen-300x86.pngsauerbier2019-01-29 18:47:332020-01-30 08:28:58Controlling and regulating solid material flows
Valves for potentially explosive areas
/in Product News /by ebroConsidered separately, a valve is a non-electrical device that does not have a potential ignition source of its own. However, when installed and working within an operating environment, valves are capable of becoming electrostatically charged and causing hot surfaces. Thus, ultimately, they can indeed be considered a potential source of ignition. For this reason, valves come under the scope of the ATEX Directive 2014/34/ EU. Issue: 2019/2020
Discharge and metering
/in Product News /byThe chemical and pharmaceutical industries often process highly active substances with properties that necessitate safe containment and effective explosion protection. As a result, the requirements imposed on process technology have not just become more diverse but also more complex. Issue: 12/2019
Digitalisation: Sensible operation and monitoring of valves
/in Product News /byGuided by its extensive experience in developing and engineering valves and actuators and prompted by the changing requirements of the market, EBRO has developed a modular sensor platform for drives and actuator units. Issue: 2019/2020
Health Check for fittings
/in Product News /byUntil now, it was not possible to predict gradual changes in the valve parts during the closing process. The result was often costly measures to prolong the service life. Thanks to intelligent measuring technology, it is now possible to detect any possible seal wear at an early stage. Issue: 4/2019
That doesn ?t get out of control
/in Product News /byIn form- and core-shooting machines, which work with the air-flow method, the quartz sand mixed with binder is shot at high pressure into a core box. The closing fitting of the core box in this application – the butterfly valve – is thus exposed to extreme pressure conditions, which it has to withstand – a great challenge for the plant operator. Issue: 3/2019
Controlling and regulating solid material flows
/in Product News /byRegardless of whether production facilities already exist or are to be newly built. the demands on their performance requirements are increasing. This requires specially adapted valves to control and regulate solid flows.